| 1) Remove the endcaps and front cover from one baseboard heater. |
2) Measure the distance between the bottom of the finned tube heating element and the top of the baseboard as shown in Fig 1.1. A measurement of 5-1/2" to 6-3/4" (140 mm - 172 mm) will fit our standard profile. |
3) Measure the distance from the wall (panel that is attached to the wall) to the front of the finned tube heating element as shown in Fig 1.2. Any measurement less than 3" (76 mm) will fit our standard profile. |
| 4) Measure the distance from the floor to the top of the baseboard
as shown in Fig 1.3. A measurement of 7-1/2" (191 mm) or more is ideal. A measurement as short as 7-1/8" will work but is not ideal. |
5) With your measurements taken it is now time to call and speak with one of our customer service reps so we may translate those numbers into the pieces you will need and take your order. |
With your components in hand it is now time to install your new BaseBoard Covers. Installation Instructions for Retro Style
If your heaters are less then 7" see our alternative Installation Instructions |
| 
